DIGENE QIAGEN LAB ROTARY PLATFORM SHAKER 1 FREE SHIPPING WATCH VIDEO

Description

SERVING EBAY CUSTOMERS WORLDWIDE SINCE 2004
Menu
Home
About
Support
SPECIALTY
ART
FURNITURE
LAB
MEDICAL
RESTAURANT
SOUND
DIGENE QIAGEN LAB ROTARY PLATFORM SHAKER 1 FREE SHIPPING WATCH VIDEO
Item Description
This listing is for a PERFECT OPERATIONAL CONDITION DIGENE QIAGEN LAB ROTARY PLATFORM SHAKER 1 as can be WATCHED IN THE VIDEO and also seen in the pictures.
Unit is in PERFECT Condition.
FEEL FREE TO WATCH A VIDEO OF THIS DIGENE QUIAGEN ROTARY PLATFORM SHAKER 1 WORKING BY CLICKING THE FOLLOWING LINK:
https://www.youtube.com/watch?v=v-r2JDXIc2M
DIGENE QIAGEN HCS Rotary Shaker 1 Rotator/Mixer/Rocker
Model: HCS Rotary Shaker 1
Depth: 6 inches
Height: 10 inches
Width: 11 inches
Item Condition : Very Good
Cosmetics : Good / Please view all pictures
Functionality : Excellent
Completeness : Complete / As everything seen in the pictures
INFORMATION BELOW WAS TAKEN FROM MANUFACTURER's TECHNICAL DATA SHEET AT: https://dmec.moh.gov.vn/documents/10182/8224682/upload_00202071_1534308588389.pdf?version=1.0&fileId=8227299
Introduction
The Hybrid Capture System (HCS) Rotary Shaker 1 is an instrument designed to shake microplates and microtube racks and consists of a shaker base and a shaker platform.
FunctionalDescription
The HCS Rotary Shaker 1 is a shaker platform attached to a shaker base with 4 screws. The shaker platform has a spring-loaded, height-adjustable roller bar that can secure two 96- well microplates or 2 microtube racks. The shaker platform has a non-skid rubber surface that stabilizes sample containers during shaking. The HCS Rotary Shaker 1 can hold up to 2 kilograms (4 lbs) of weight.
The HCS Rotary Shaker 1 can be used in environments from 0–50°C, allowing for cold room use as well as incubated applications.
The HCS Rotary Shaker 1 is constructed of heavy-gauge steel that provides a stable base for a steady, vibration-free operation.
Operational modes
1
2
3 Fuse drawer
The speed of the Shaker 1 is variable, from 200–1200 revolutions per minute (RPM). It operates in a circular motion with an orbit of 0.3 cm (0.12 inches).
The HCS Rotary Shaker 1 features a timer with an operating time range from 30 seconds to 30 minutes. Continuous shaking is achieved when the time controller is placed in the HOLD position.
GeneralOperation
The HCS Rotary Shaker 1 can be used in either continuous or timer-terminated operation.
Certain load and speed ratios can cause vibration of the instrument. If the instrument vibrates, adjust the speed and/or load as necessary to eliminate the vibration.
5.1 Continuous operation
1. Power ON the instrument.
The power indicator illuminates.
2. Using the speed controller, set the desired speed.
3. Set the time controller to HOLD.
Note: An audible click is heard when setting the time controller to HOLD.
4. Load microplates or microtube racks onto the shaker platform by pulling back on the roller bar, inserting the microplates or microtube racks and slowly releasing the roller bar to the secure the microplates or microtube racks.
5. Make sure the roller bar is even and tight and positioned to hold the microplates or microtube racks firmly. Place the microplates or microtube racks symmetrically for a good balance. If shaking a single microplate or microtube rack, center it on the shaker platform. If shaking 2 microplates or microtube racks, place one each on the left and right sides of the shaker platform equidistant from the center.
6. Make sure that the screws on each end of the roller bar are tight.
7. To begin shaking,press the start/stop switch.
The running indicator light illuminates, and the HCS Rotary Shaker 1 will shake continuously until the start/stop switch is pressed.
8. To stop the shaking, press the start/stop switch.
Timer-terminated operation
Timer-terminated operation allows for timed shaking procedures. The time controller does not move in timer-terminated operation. At the end of the designated time, repeat the shaking with the same parameters by simply pressing the start/stop switch. The shaking time may be set between 30 seconds and 30 minutes.
1. Power ON the instrument.
The power indicator illuminates.
2. Using the speed controller,set the desired speed.
3. Using the time controller, set the desired time interval.
4. Load microplates or microtube racks onto the shaker platform by pulling back on the roller bar, inserting the microplates or microtube racks and slowly releasing the roller bar to the secure the microplates or microtube racks.
5. Make sure the roller bar is even and tight and positioned to hold the microplates or microtube racks firmly in position. Place the microplates or microtube racks symmetrically for a good balance. If shaking a single microplate or microtube rack, center it on the shaker platform. If shaking 2 microplates or microtube racks, place one each on the left and right sides of the shaker platform equidistant from the center.
6. Make sure that the screws on each end of the roller bar are tight.
7. To begin shaking,press the start/stop switch.
The running indicator light illuminates, and the HCS Rotary Shaker 1 will cease shaking at the end of the designated time.
Note: Shaking can be interrupted by pressing the start/stop switch. To resume shaking, press the start/stop switch.
Voltage
120 V
HCS Rotary Shaker 1 catalog number
6000-2110E
Amp
1 AMP 250 volt
0.25 AMP 250 volt
Type
5 x 20 mm (0.25 x 1.25 in.)
Time-delay UL-listed fuse
FEEL FREE TO ASK ANY QUESTIONS YOU MAY HAVE
!
STOCK # 211606
Payment Terms
Shipping Terms
Return Terms
Policies & Terms
Contact us
We Accept Paypal
We Accept Mailed Payment To Each Project
Wire Transfers Are Also Accepted
Freight Shipments: Buyers Must Confirm If Delivery Location Has A Dock, A Forklift Or Strong People To Unload It Off The Truck In Order To Qualify For Free Shipment Delivery
Please Check Shipping Tab For More Information
"SMALL NON FREIGHT ITEMS WILL BE SHIPPED TO CONTINENTAL USA ADDRESSES FOR FREE!
We'll ship to Puerto Rico, Hawaii & Alaska for free items under 70 lbs, if over 70 lbs to Puerto Rico, Alaska & Hawaii should please contact us for shipping quote!
SHIPPING FREIGHT ITEMS: FREE COMMERCIAL CONTINENTAL USA SHIPPING TO LOCATION WITH DOCK OR FORKLIFT!!!
INTERNATIONAL BUYERS OF SMALL OR FREIGHT ITEMS SHOULD CONTACT US FOR SHIP QUOTE
Each Project's shipping is of the highest quality with maximum protection for your package. We have years of experience and use only the best of materials to ensure you get exactly what you ordered. If the item arrives damaged when your shipment arrives, we guarantee your money back. No hassles, no worries.
Most freight items ship within 3-6 days maximum.
International Shipments: Additional fees, customs brokering, and customs clearance are the responsibility of the buyer. Please contact us and tell use the country, city, and postal code to arrange shipment before purchase
Pallet shipping :
If your item is large enough we will ship it on a pallet. We'll cardboard & wrap the unit to the pallet.
FREE COMMERCIAL CONTINENTAL USA Shipping cost is to a business with a dock or forklift If you need a liftgate service add
If you need residential service add If you need inside delivery add
Please let us know so we can add these charges to your shipment
Lift Gate Service:
A liftgate is a motorized platform attached to the back of the truck that will physically lower your order to the ground, so that you can take it inside your business or residence. The truck driver will place your order on the ground, and you are responsible for bringing it inside. If you do not have a loading dock or a forklift, you will need a liftgate and must select this option at checkout. The charge for the liftgate is .00.
We do not sell filthy merchandise but we do not spend hours detailing every crack and crevice of every item, therefore a good cleaning may be in order when you receive a purchase. We will post an adequate number of pictures on an auction to give buyers a good sense of what they are bidding on, please examine the pictures closely.
All items are tested prior to sale
Items are expected to be paid for at the time of purchase
We're small, trying to do right. Please contact us if you have any questions, we'll respond immediately!
DISCLAIMER:
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
For Medical or sensitive items eBay demands that we state this: "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Contact us immediately if there is a problem with your order or shipment via eBay messages, we will respond immediately.
Customer service is available weekdays 8:00 a.m. to 5:00 p.m., EST
SERVING EBAY CUSTOMERS WORLDWIDE SINCE 2004
Home
About
Support
Copyright © EACH Project. All Right Reserved. Powered by MerkRv Design
Listing and template services provided by inkFrog