34430 Replacement A/C Recycling Filter-Drier - Engine Cooling Solution

Description

Optimal Compatibility: Tailored for Robinair models 17700A, 34450, 34700 (1997), AC375, AC375A, AC375C, and 34134Z, our A/C Recycling Filter-Drier ensures seamless integration with refrigerant recovery, recycle, and recharge stations.
Premium Quality Assurance: Crafted from top-tier materials, our LINGYAO 34430 guarantees superior acid and moisture removal, elevating the efficiency of your automotive air conditioning system.
Precision Installation Guidance: For a hassle-free experience, ensure the refrigerant flow arrow on the 34430 filter label points to the left. The word "inlet" at the filter's end must align with the right side, providing foolproof installation.
Routine Maintenance Excellence: Uphold your equipment's peak performance by adhering to regular filter replacements. Maintain the longevity and efficiency of your air conditioning system effortlessly.
Customer Satisfaction Commitment: With a 100% satisfaction guarantee, we stand behind the quality of our product. Experience worry-free usage, as we offer free replacements to address any manufacturer defects.
Product Description
To avoid possible hazardous release of refrigerant, follow these steps carefully.
The 34430 Replacement Filter is for mobile applications only.
If you have a microprocessor-controlled station, follow the directions in that station's operating manual to replace the filter.
If your station does not have a microprocessor, follow these directions.
If recycling is in progress, turn off the RECYCLING switch. The compressor continues to operate until refrigerant clears from the suction side of the A/C system.
Loosen the nuts at each end of the filter and remove the filter.
Install the new 34430 filter. The refrigerant flow arrow on the filter label must point to the left. The word “INLET” stamped on the end of the filter must be on the right.
When the filter is in place, evacuate the station for approximately 10 minutes to remove the air that entered during the filter changeout. Attach a vacuum pump to the oil drain port and open the oil drain valve. Start the vacuum pump and operate for the required amount of time.
The station is ready to resume operation.