10047 235 261 MOTOR MOUNTS FOR 1949-54 CHEVY CAR WITH 1952-54 OR 1958-62 MOTOR

Description

PLEASE READ & UNDERSTAND THE ENTIRE DESCRIPTION PRIOR TO PURCHASE!
FOR MORE INFORMATION, PLEASE GO TO OUR OFFICIAL DAVIS SPEED EQUIPMENT WEBSITE WWW.DAVISSPEEDEQUIPMENT.COM
NOTE THAT EBAY NOW CHARGES SALES TAX IN MOST STATES.
OUR WEBSITE DOES NOT.
(OUTSIDE WI).
NEWLY REVISED!!
THESE MOUNTS ARE INTENDED FOR MOUNTING EITHER A 1952-54 OR 1958-62 VINTAGE 235 OR 261 (WHICH HAVE 3 BOLT SIDE MOUNTS)
INTO A 1949-54 CHEVY CAR. MAY WORK IN OTHER APPLICATIONS AS WELL. SEE DIMENSIONAL DRAWING TO DETERMINE
IF THESE WILL WORK FOR YOU. BASICALLY, IF YOU HAVE A 4 SIDED FRAME RAIL, A 22"-24" INSIDE FRAME DIMENSION,
AND THE OIL PAN RAIL IS APPROXIMATELY LEVEL WITH THE TOP OF THE FRAME RAIL,  GIVE OR TAKE 1/4", THEN THESE
SHOULD WORK FOR YOU.
FOR 1937-48 CARS PLEASE SEE PART 10083 ON OUR WEBSITE.
FOR OTHER APPLICATIONS, PLEASE SEE OUR UNIVERSAL KIT 10074.
NOTE: 1952-54 BLOCKS ALSO HAVE A 3 BOLT SIDE MOUNT, BUT IT IS A DIFFERENT PATTERN THAN THE 1958-62 BLOCKS. THESE MOUNTS ARE DUAL PATTERN SO THEY WILL WORK WITH BOTH.
CLEARS STOCK STEERING ON A 1949-54 CAR.
CLEARS STOCK EMERGENCY BRAKE.
WORKS WITH STOCK GENERATOR.
CLEARS SANDEN 508 A/C COMPRESSOR.
WORKS WITH FENTON HEADERS.
AND YES, IT INCLUDES THE RUBBER MOUNTS...
REQUIRES WELDING OF FRAME BRACKET TO CAR FRAME.
AS WITH ALL OUT MOTOR MOUNTS, OUR RUBBER MOUNTS ARE A HIGH QUALITY
INDUSTRIAL GRADE MOUNT THAT HAS A POSITIVE STOP WHEN YOU BOLT THEM UP
UNLIKE MANY OF OUR COMPETITORS THAT USE A FORD FLATHEAD KNOCKOFF
MOUNT WITH NO POSITIVE STOP AND IN SOME CASES THE RUBBER DISINTEGRATES
WITHIN JUST A FEW MONTHS OF INSTALLATION. THAT WILL NOT HAPPEN WITH OURS.
SOLD AS A COMPLETE SET WITH RUBBER MOUNTS, HARDWARE & INSTRUCTIONS..
WANT TO SEE MY OTHER PARTS?
1)  THEN GO TO THE TOP OF THIS PAGE.
2)  LOOK UNDER MY USER I.D.
3) CLICK ON "VISIT STORE"
DESIGN IS THE PROPERTY OF DAVIS SPEED EQUIPMENT, LLC